Recover data from IBM/Hitachi Drives with physical defects in data area by DATA COMPASS
Summary:
1.Logical Malfunctions
2. Physical malfunctions
What malfunctions Data Compass cannot handle directly
Partition Loss
File loss or destruction
Virus attack
Accidental formation
Accidental deletion or clone
Data recovery from a drive with physical defects within the firmware Service Area, unrecoverable using conventional processes. (Note: IBM/Hitachi drives are currently supported and other brands will come with this feature in the near future)
Data Recovery from drives with severe defects in the firmware service area using hot swap by Data Compass Based on that the data area can be accessed by DC and DC can recover data from "clicking" drives caused
by poor performance of the Read/Write head assembly or degraded magnetism of the servo information on the platter surface.
Data recovery from drives with a wide distribution of bad sectors where Logical Recovery software has been unsuccessful.
Data recovery from drives with multiple bad sectors or unstable read caused by poor head exchange
Data recovery from drives whose heads or motors are unstable Recover target data fast when there are multiple bad sectors or unstable read or bad sectors caused by poor head replacement. For hard disk image, DC is the best choice. To drives with very severe or complete physical damage, DC cannot recover data directly.
The following are some examples:
PCB burnt
Complete head or motor damage
Severe scratches on the disk data areas
The HDD was overall cleared or the target data area was covered.
The data in the data area cannot be viewed by DC
Format:
Pages : 16
Size: 1.65 mb
Author : SalvationDATA Technology, LLC.
Download:
Recover data from IBM/Hitachi Drives with physical defects in data area by DATA COMPASS